LPC1 Controller is based on the ability to regulate selective input voltage to individual luminaire, independently from the other luminaires in the system. LPC1 compatible with all HID lamps and does not require any changes in the present electrical infrastructure. LPC1 does not create low voltage at the end of the line which forces lamps to switch off. Further more LPC1 does not cause any electrical interference to any of private or public sectors.
Energy Efficiency is achieved in street light, when full light is not required, by the following facilities:
Central voltage controllers that assembled in the switch cabin, drops the input voltage on specific line at constant regimes. This type of controllers creates voltage drop along the line.
Electronic ballasts installed in the luminaries.
Individual Voltage Controller that can be installed on a gear tray at the bottom of the column serving up to 3 luminaries at the same time. IE type stabilizing the voltage at margins of +/- 1%, enabling voltage regulation of each individual device.
מפרט טכני
Physical size 50x100 mm, assembled on gear tray at height of 50 cm above ground.
Easy, fast and low-cost retro- fit, does not require cherry picker or any other special equipment or tools.
In case of problem with the controller or with the network, an automatic bypass enables normal operation of the lamp.
The controller can be assembled in a box close to any indoor or outdoor luminaries
.png?id=8448152){kind=logo}